BRZ cam plate leak repair - Extreme86
Remove the masking tape and slide out the wooden sticks carefully as to not disturb the seal.  You may need to loosen the bolts slightly.  At this point you may wish to tighten all three bolts by a half turn and allow the sealant to cure some more or go ahead and tighten all three bolts to spec.  (Approx. 12 ft. pounds).  I went ahead and torqued the bolts at this point and let the car sit for 24 hours.

Remove the masking tape and slide out the wooden sticks carefully as to not disturb the seal. You may need to loosen the bolts slightly. At this point you may wish to tighten all three bolts by a half turn and allow the sealant to cure some more or go ahead and tighten all three bolts to spec. (Approx. 12 ft. pounds). I went ahead and torqued the bolts at this point and let the car sit for 24 hours.